We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The CTSCT004.2 Steering Wheel Interface allows you to change the factory original headunit to an aftermarket car stereo whilst maintaining the use of your factory stalk/steering controls.
Compatible with:
Fitted with Quadlock connector and NO FACTORY headunit
The Interface consist of two parts; The Steering Wheel Interface and the Car Stereo Patch Lead.
The Patch Lead Supplied can be used with the following:
For the chinese branded headunit you have to configure the patch lead according to what your head unit requires:
This will depend on the headunit type, most chinese brand stereos have 3 wires marked SW1, SW2, GND. This is the 2 Wire Resistive Learning Type Patch Lead. Then there are those that uses 3.5mm Jack (headphone) type connection, for this one you need to choose the 3.5mm Jack Learning Patch Lead.
The Interface also provides the following outputs:
Note:
We make every effort to make sure that the information provided is correct. If you are not sure on the suitability of the product, remove the original headunit and compare the original connector in the vehice to the photo to make sure it is the same.......
If you are still note sure, then simply contact our customer services.
Return Policy
All products come with a manufacturer’s one year warranty.
This does not affect your statutory rights as a consumer.
Warranty
Return Policy
All products come with a manufacturer’s one year warranty.
This does not affect your statutory rights as a consumer.
Warranty